Weicai Laser Repair Machine

• Applicable Industries: LCD Screen Repair
• Product Support Size: Under 86 Inches
• Warranty Period: One Year
• Product Status: Brand New
• Transport Package: Wooden Box
• Origin: Guang Zhou
• Model NO.: CR-512DQ-30
• Production Capacity: 50000

Product Description

Product application

Mainly under the mirror through the high frequency (30 HZ) pulse laser beam on the LCD screen inside the micron size of the semiconductor circuit components cutting and trim especially passivation layer (silicon oxide / nitride) and metal interconnect to the role of line maintenance, the device can be used for different target material design digital display adjustment laser pulse energy and interface optional wavelength.

 Use range of the equipment

 Scope, (TV, PC, touch teaching machine, splicing, notebook, digital, car display products) LCD internal line defects caused LCD screen window, vertical line, line, cross, half line, the size of the head line or LCD screen built-in GOA structure caused by black screen, gray screen, net coarse, picture jitter, level uneven display, and a series of screen substrate internal line problems caused by fault phenomenon.
Scope 2. Abnormal vertical line, no display, and other adverse faults occurred in TFT \ OLED mobile phone screen and wearable products.

1. Laser type: single modulation Q (crystal 5MM) semiconductor laser ND-YAG, specific parameters are as follows:

Laser current	<=20A	lasing mode	Multi-mode
Laser voltage	AC220V 50HZ	output energy	1064nm@80-350mJ  532nm@60-280mJ
The power of the machine	Less than = 2,500 W	energy stability	Less than =1%@1064nm / 532nm
Laser lamp	F7-85-155	operate mode	Work intermittently, continuous working time maximum 50min and stop minimum 10min
wavelength	1064NM 532NM	cooling-down method	hydrocooling
repeat frequency rate	1-30HZ	Water flow	5L/Min
pulse length	0.1-1.0NS	water pressure	Less than =0.1Pa
Tune Q way	Active Q	Water tank capacity	6L
Overall specification: 190CN-203CN-175CN
X axis itinerary	800MM	Y axis itinerary	1400MM
The X manually moves the trip	800MM	Z axis focuses on the itinerary	230MM
packing specifications	1900-1800-1800MM	weight	835KG

1. Applicable LCD panel size 85 inches and below
2. Point (2um X 2um), horizontal and vertical lines (50um X 3um long), block (50um X 50um)
3. Digital spot, electronic light brake red light can remember 5 kinds of spot specifications
4. Spot system: Weicai developed from the 4th generation
5. Light source: red light (laser spot labeling) upper light source (cold white light irradiation) lower light source (58-inch backlight, highlighted LED light bar)

Optical imaging system

1. Type: Microscopy imaging module XF-VM 3-1 XCV 6.3
2. Objective lens switching system: precision 4-hole / electric switching type (linear)
3. Precision objective lens group: 5 times, 10 times, and 20 times
4. Enpiece type M Plan APO 5X 10X observation (visible)
5. Eye type M Plan NIR 20X laser processing (NIR)
6. CCD: BNG connector 1200lines / colors
7. Monitor display: 17inches (4:3) LCD

Processing and loading stage and drive system

1. Size of working platform: 1800 mm-1530 mm

 

1. Table carrier material: precision grinding optical glass platform

 

1. Platform base: precision steel structure

1. Sports system: private service contro + precision linear wire guide rail module box

1. Motion contro: set 4-gear conversion (ultra low speed, medium speed, high speed, super high speed)

Focus system

 

1. Focus type: electric point control / knob control focus

The shock absorber system

1. Form of shock absorber: the vibration transmitted by 4 air bags
2. Natural frequency (vertical / horizontal): 2~2.3 Hz (Equipment level: B)

 

supply electricity

1. AC 220 V ± 10%, 50 HZ / 60HZ 20A power supply connector M6 terminal table

Ground wire JIS grade 1,8 mm sq
Solid warranty period of equipment: one year (calculated from the next day after acceptance)